Don’t Underestimate Dryer Lint

Cleaning out your dryer’s lint trap is one of the easiest home maintenance tasks there is. And yet, countless people skip over it while running load after load through their dryer. After all, how much of a difference can something as small as a lint trap make?

A lot, actually.

A dirty lint trap causes your dryer to underperform, and it can lead to it breaking down faster. Even worse, it can pose a serious safety issue. Dryer fires contribute to an average of 15,960 structure fires a year. 31% of these fires come from a failure to clean your dryer.

It only takes a few seconds, yet cleaning your dryer’s lint trap makes a serious difference. So please…

Clean Out Your Lint Trap EVERY Time

When your lint trap is full, it can’t do its job of capturing excess lint. This lint has to go somewhere, and it usually goes into your dryer hose. Soon, the hose starts to become clogged, and your machine’s performance begins to suffer.

The machine has to worker harder to dry clothes, and you may have to run a load multiple times before you achieve the results you should have received after the first cycle. In addition to damaging your machine and wasting your own time, you’ll see your energy bill start to climb.

And most importantly, a dirty dryer puts you at risk of having a fire in your home. Dryers can run very hot. Lint consists of dry, loose pieces of fabric. Put these two factors together, and you have a recipe for disaster.

Emptying Your Lint Trap Isn’t Enough

Even if you’re cleaning out your lint trap responsibly, it’s not going to get all of the lint out of your system. That’s why you still need to have your dryer vents regularly inspected and cleaned out. For that, you’ll want to call a professional.

A clean dryer is safer and more effective, something you from a lot of troubles in the future. For dryer vent cleaning in Dayton, Ohio and the surrounding area, contact Air Duct Cleaning & Radon Company today!

Frequently Asked Questions About Radon Testing Before Basement Renovation

Short-term tests typically run for 48 to 96 hours. That’s enough to get a clear baseline before renovation. If you're on a tight timeline, we offer same-day professional radon testing, using calibrated digital monitors with faster turnaround and higher accuracy.

🛠️ Pro Tip: Schedule your test at least a week before framing or insulation begins — that gives you time to take action if mitigation is needed.

Often, yes. Finishing a basement reduces natural ventilation, seals air pathways, and creates negative pressure zones — all of which can trap radon gas inside. We frequently see radon levels double or triple after renovation.

If you plan to install drywall, flooring, or closed-cell insulation, test first. It's much harder to retrofit a system once the space is finished.

Absolutely. In fact, newer energy-efficient homes are often more airtight, which can amplify radon accumulation.
Radon isn’t about age — it’s about soil conditions, slab construction, and airflow. We’ve mitigated brand-new builds in Columbus that tested over 10.0 pCi/L before occupancy.

The EPA recommends testing every 2 years, but after a basement remodel, you should test immediately after the work is complete — even if you tested beforehand.

🎯 And if you already have a radon mitigation system, make sure to re-test after any HVAC upgrades, insulation changes, or new construction that may affect airflow.

  • Below 2.0 pCi/L: No action needed — considered low risk.
  • 2.0 to 3.9 pCi/L: Consider mitigation, especially if children live in the home.
  • 4.0+ pCi/L: The EPA’s action threshold. Mitigation is strongly advised.

🔎 We’ve seen plenty of “borderline” homes spike to dangerous levels after finishing — so if you're anywhere near 4.0 pCi/L, don't wait.

Final Takeaway: Test First, Then Build

The only way to ensure a safe renovation is through early detection. Testing for radon before finishing your basement isn’t just smart — it’s essential.

Call (614) 799-8530 to schedule a professional radon consultation Licensed. Proven. Local. - Get answers before you build — and breathe cleaner air afterward.

Serving Columbus, Dayton, Springfield, Cincinnati, and all of Central Ohio

chevron-down